5 Easy Homemade natural hair Gel Recipes

Hair gels contain chemicals that are either natural or synthetic in nature, which provides nourishment for the hair and scalp. Hair gels have been found to include polymers that help hold on to the hair without being wrapped up into the hair shaft. It primarily helps the hair to remain in a uniform and undisturbed state throughout the day. Hair gels are suitable for all kinds of hair, whether they are curly, textured, colored, wavy and relaxed. In a remarkable fashion, this article takes a look at five homemade natural hair gel recipes that you can make at home and at a pocket-friendly rate too.



Xanathan gum can be found in a wide range of products from food items, personal care products, cosmetics, conditioners and styling agents, and shampoos. It is increasingly becoming popular partly, because of its plant-based origins but also due to it being environmentally friend (it is biodegradable). Over the year many do-it-yourself (DIY) enthusiasts have come up with ways to make xanthan gels that can be used as hair gels and conditioners.


One Packet of gluten free Xanthan gum (each pack contains a tablespoon)

Four liters of Distilled water


Three bowls (for holding xanthan gels with varying thickness)

One teaspoon for measurement

One spatula

One fork for whisking of mixture


It takes about 3-5 minutes to prepare.

Read More : How much hair Loss is normal for a Woman


  • Measure out four ounces of water into the first bowl
  • Measure out one teaspoon of xanthan gum, by sprinkling it into the bowl of water
  • Allow it to stay for about thirty seconds, as it forms a thick layer of film
  • Use the spatula to remove coatings of gum that may have formed around the bowl
  • Whisk the mixture with a fork vigorously, for some seconds.
  • Allow the mixture to settle down and to thicken up for some seconds.
  • You may choose to whisk it further if there are visible flakes of the xanthan gum so that they can blend up properly into the mixture.
  • Take the prepared mixture and place it into a refrigerator for it to freeze.
  • You can add preservatives if you want to preserve it for use in future.

With the method given above, you can vary the thickness of the preparation to your desire, by either altering the quantity of water in each bowl or the amount of xanthan gum used in the preparation.


Flaxseed hair gel is an inexpensive and natural hair product that provides nourishment for curly or wavy hair and can be produced at home by anybody with little or no skill. It helps moisturize wavy hair while reducing stiffness that is often associated with it. It is pertinent to note that a lot of additional ingredients may be introduced into the homemade flaxseed gel described below, to customize it for the needs of your hair.


Two Cups of flaxseed

Four Liters of water


A pot

A stove for heating

A cooking pot

A strainer

A fork for whisking the mixture

A big spoon needed for stirring the mixture.


About 15-20 minutes


  • Simply soak the flaxseeds in water and leave it overnight, this is to increase the gel yield, reduce cooking time and to make the straining process easy. You may choose to skip this step because it is optional.
  • In the cooking pot, combine the flaxseeds and two cups of water.
  • Place the pot on the stove and apply heat for about eight minutes, while stirring the mixture occasionally. At this stage, some preparation method requires the addition of Epsom salt, which is still optional.
  • As the mixture starts to boil, stir gently and continuously.
  • As the mixture constituency becomes a thin, foamy jelly, reduce the heat to the medium.
  • Put off the heat when the flaxseeds become suspended, instead of sinking to the base of the pot.
  • Drain the mixture through a strainer into a bowl.
  • Allow the mixture to cool off a bit, after which you can add other ingredients of your choice such as butter, aloe vera gels, oils, etc. This step is also optional, and you may decide to skip it as well.
  • If you are adding other ingredients, whisk the mixture with a fork, and break up visible clumps until you get a gel consistency that is similar to egg whites.
  • Pour the mixture into a container for freezing in the refrigerator, supposedly for use in future while you may also apply it directly to your hair.


  • The plastic container can melt if the gel is too hot, so it is good you let it cool for some time.
  • Refrigerated flaxseed gel often leaves water and blob of gel in the container, to prevent this from happening; you can use a whisk attachment on an electric mixer to whisk the mixture thoroughly after it has been strained.
  • Use an airtight container when putting it into the fridge or freezer.

Read More : How to Protect your Hair while Swimming

Flaxseed gel can also be prepared by making use of a microwave oven as an alternative to the method described above, even though the later appears to be the most popular of the two approaches.


The ingredients you add to the flaxseed hair gel is a function of the quality of your hair and how it reacts to such additives. To get the best combination suitable for your hair, you may have to experiment with them for a while. Find below some common additives that go well with the flaxseed gel and their properties as well:

  • To improve the slip property of the flaxseed hair gel, use slippery elm bark or boil the flaxseed in water gotten from marshmallow root, that’s been soaked overnight in cold water.
  • You have the choice of using essential oils, vitamin E oil, citric acid, and grapefruit seed extract as preservatives.
  • To improve the curl or wave, you may add aloe vera juice or gel, seamollient and Epsom salt.
  • You can use lavender, clove, cinnamon, rose, and lemon oils not only to improve the fragrance but as preservatives.
  • For improved hair moisture, add shea butter, glycerine, and oils such as wheat germ, hemp seed, and avocado.
  • To improve the hold, you may add honey, seamollient, and agave nectar.
  • Any of Xanthan gum, guar gum, lecithin, and pectin helps increase the gel density.
  • Coconut oil should is not recommended as an additive because it has a low melting point.


Aloe vera hair gel is derived from the great aloe vera plant and is a natural gel that adds moisture to your hair and is ideal for all hair types. The good news is that you can prepare this gel at home and at your convenience too. The preparation is outlined below:


One big sized Aloe vera plant

Grapefruit seed essential oil


One Cutting board

One Spoon

One container for holding the gel


This preparation shouldn’t take more than ten minutes.


  • Cut off the bottom portion of the aloe vera plant.
  • Cut out another portion of the aloe vera plant and split it into two, right down the middle.
  • Graze the upper layer of the aloe vera plant with a spoon, and avoid grazing too hard to avoid pieces of the plant getting into your hair gel.
  • Extract as much as you need from the aloe vera plant.
  • The product is a rich aloe vera gel with a rich consistency, which you can give a fruity scent by adding grapefruit essential oil (optional).


Gel from chia seed is used in ancient times for health, culinary, beauty, and decorative purposes and it is fast becoming a trend in modern times. It has also found use as an important way of nourishing your hair; when it is combined with lemon juice it infuses the hair with moisture and protects hair locks from dry air.


Three teaspoons of Chia seeds

Three cups of water


A bowl

A ball jar with a lid


  • Measure out three tablespoons of Chia seeds into the bowl.
  • Add 3 cups of water into the bowl.
  • Allow the mixture to sit for some minutes as the Chia seed absorbs the water and become gelatinous.
  • Whisk the mixture frequently until it thickens into a rich consistency.
  • To stop the seeds from clumping together, put the mixture into a ball jar and shake it vigorously at every short interval.
  • Leave the gel in the fridge, so that the seeds can absorb the full quantity of water; however, you will have to give it a good shake before using it.
  • To vary the thickness of the gel, alter the amount of Chia seeds and water used for making the mixture.

Chia gel has several variations that are dependent on the liquid used in making the gel mixture which could range from coconut water to fruit juice or vegetable juice.


The lemon hair gel requires a product that provides the gelling effect such as flax seed gels, powdered agar agar or a packet of gelatin, while the lemon juice adds the sugar content to it as a bonus.


One Cup of water

Lemon juice (two tablespoons)

One cup of gelatin (measure out one tablespoon)




A bowl


Twelve minutes


  • Measure out the gelatin into a saucepan, together with water, while medium heat is applied until it dissolves.
  • Take the pan off the heat and add the lemon juice to the mixture.
  • Mix very well until you have a rich consistency.
  • Leave it to cool.
  • It is possible to make conditioner version of the homemade lemon gel by including additives such as aloe vera or coconut oil

Read More : How much Conditioner should you Use


The benefits of hair gels are numerous and are not limited to the following:

  • The use of hair gel is compatible with all types of hair as stated earlier, and its efficiency on hair is dependent on duration and the manner to which it is applied.
  • It makes gel-based styling techniques such molding, freezing, scrunching and sculpting possible.
  • The use of hair gel offers you a remarkable control over your hair which is the dream of anybody with a plenty of hair. It gives you great pleasure and freedom to create whatever look and style you desire.
  • Many hair gels are made from organic herbs which are a rich source of hair food, moisture, and nutrients that can be of immense benefit as your hair and scalps soak them up.

Read More : How to Prepare Washable Hair Dye

How to Use your Google Map Offline

 How to Use your Google Map Offline

It’s possible to utilize Google Maps disconnected, which is perfect in the event that you end up expecting to scope out a course or figure out where you are when you have no Wi-Fi or have come up short on your month to month information remittance. Numerous individuals use Google Maps every day, so having the capacity to download disconnected maps is an exceptionally reasonable element. Here’s the manner by which to utilize Google Maps disconnected.

Google Maps tips and traps

Step by step instructions to utilize Google Maps disconnected

                             how to use google map offline in android phone

The one caveat to utilizing Google Maps disconnected is that you will need to utilize it online in order to store the required data first. In view of that:

Open Google Maps (while online) and scan for your sought area.

Once you’ve found the area/region you need, the simplest approach to save it for later is to go to the choices menu by tapping the three lines (hamburger) symbol and tapping Offline areas..

                                                            save google map offline


Next, tap plus or add symbol in the base right of the screen and you will provoked with a message that says “download this area?”


Drag the guide map the square box until it includes the region you need a map of. Squeeze to zoom (putting two fingers on the showcase and uniting them) to surround the region you need. Move your fingers in the inverse approach to zoom out and envelop a bigger region.

When you are content with the map area, tap Download.

google maps offline navigation

Hit download and give your guide a name.

You will be provoked to name your region. Do as such in the box that shows up.

When you have downloaded the map to your device, you can get to it by tapping the menu symbol at the upper left of the primary Maps page and coming back to Offline areas, where you ought to now see your downloaded area.

best offline maps for android
best offline maps for android

You will locate your spared map in Offline areas. Rename it by tapping the pencil symbol at the upper right.


Confinements of disconnected maps

There are a few confinements to the usefulness of the disconnected maps, for the most part with respect to the span of the area you’re searching for. You can’t download a guide of, say, the entire of Denmark: the case you draw around the zone you need has a restricted size, and it’s impractical to download anything that takes up more than around 1.5 GB of storage room.

Downloaded Google maps have a tendency to require a considerable amount of storage room to oblige the point by point data they give, so we prescribe associating with Wi-Fi before downloading every one of the maps you require. Also, the maps you download will be put away for 30 days and after this they are consequently erased, so don’t accept they will keep going forever.

Insight Terms

  • google maps offline android
  • google maps offline iphone
  • offline maps android
  • google maps offline area unavailable
  • google maps offline navigation
  • offline maps iphone
  • best offline maps for android
  • google maps offline pc

How to use Virtual Box

Hi Friends! Many time you download or you have any app which is made for any other OS and they are running any different OS. Or sometimes you want to test any OS but you can’t because of creation of CD/DVD and then installation of OS, and if something goes wrong, you may suffer from data loss other issues. This makes us helpless and not to try new Operating Systems. So friends there is a solution to it. You can use the Operating System Virtually. To run the Operating Systems you need a Software which will create virtual hardware for you to run new guest Operating System.

The Softwares which are widely used for this are VM Ware, Virtual Box, Virtual PC etc. The Virtual PC is a software product of Microsoft Corporation. So to run Virtual PC you will need Microsoft Windows XP or Vista or Windows 7. And when it comes to performance of both host and guest OS, its very heavy on resources. Its also complex on the GUI part which makes it very uncomfortable to use. For more info on Virtual PC you can go here. The Host OS is the OS on which all the virtual OS are going to be installed. The Guest OS is the OS which will be installed Virtually on the Host OS.
VM Ware is the Virtualization Software which is available for both Windows and Linux Host Operating Systems.It is also having some of its specific features. But it is also having some of its complexities. For more info on VM Ware you can go tohttp://www.vmware.com/. Virtual Box is also one of the Virtualization Software which is Open Source and is widely used. It is very easy to configure and easy to use Software from Oracle. Its available for all available OS and can run any OS as guest. The steps which must be followed to run any quest OS on Virtual Box are as follows and they will be same for all hosts.
Step 1: Download and Install the Virtual Box. To download it go tohttp://www.virtualbox.org/wiki/Downloads.

Step 2: Now click on new to create new VM (Virtual Machine) and Give name & select the Guest OS from the drop down list and press next.

Step 3: Now after pressing next you will see a dialog box to select the the primary memory which must we allocated to RAM. You can select any size but it is recommended to have at-least 512 MB.

Step 4: Now you will be prompt to select the virtual hard disk. Here in this dialog box you can select the existing one or you can create the new one. Here I am creating a new virtual Hard Disk.

Step 5: In the next prompt you will press next after which you will be prompt to select the Hard Disk Storage Type. Here you can select the Dynamically expanding Storage or Fixed type Storage. Dynamic Storage is useful when you have low free space in your Hard Disk and fixed is helpful when when you have a large free space on your HD. Dynamic Storage expands according to the number and the size of files stored inside that virtual HD and it will expand till its maximum select. I have selected here Dynamically Expanding Storage. Here you can also attach a non booting hard disk to your OS.

Step 6: On the next step you have to select the location to sore the virtual hard disk and the maximum allowed size for the virtual hard disk. Here I have selected 8 GB as maximum allowed size for it because maximum requirement is of Windows 7 which is of 7 GB approx.

Step 7: Now on next prompt your virtual system creation is finished by pressing Finish.

Step 8: Now select the recently created the Virtual Machine and then press the Settings button on the mar below menu bar.

Step 9: Now on next window, click on Storage in Lift Side pane which will show the storage options in right side. Now you will see a tree of IDE controller under Storage tree. Now click on Empty under that IDE tree which will show the IDE options in its right side. There select the CD/DVD image or the CD/DVD drive by which you can install or try the new OS on your Virtual Machine. After doing this press OK on the Settings Window of your Virtual Machine.
Step 10: Now done Now Select the Virtual Machine, which you have created, in the left side and then press Start in the tool bar below the Menu Bar. Here I am showing the screenshots of the Ubuntu 10.04 Desktop Edition which is a famous Linux flavor.

So friends be more productive with the Virtual Box. Now a days this virtualization has become the necessary part of the todays servers!