Where an air conditioner is placed is determined by the specific needs of the homeowner. The best central air conditioner should only be mounted in a location that it will be used. The placement should, therefore, meet the needs of a room. Moreover, the hot or cool air streams must not disturb the users. The indoor units should be placed in an open area free of distractions that might block the airflow. Lastly, the AC must not be mounted near a heat source. Do you want to know the entire process of installing an AC? Follow this guide.
Selecting the right location
A window conditioner is best installed at the closest point to the room center. It also has to stay away from direct sunlight so it should be on the shady side. Sunlight energy can overwork the unit as it tries to cool off your room. The unit is mounted near a power outlet to avoid the tangling of an extension cord. In case a cord is needed, only the one recommended by the manufacturer is used.
The surrounding area of the selected location is inspected first and prepared. Any damages and sills are repaired to minimize potential hazards like accidental falling of the AC. All obstacles which might inhibit the installation are cleared from the area. Window screens are removed so that the unit may be accessed easily. Conditioners can be clumsy at times, hence the need to clear the surroundings.
Certain units need brackets which are installed on the outer side of the house. Some adjustments may be needed after the installation is done. Metal screws are needed if the brackets have to be mounted onto metal frames while wood screws are used on wooden surfaces.
The unit is positioned and fastened to the window opening. The window is fully opened to ensure enough room for the unit. Then the accordion panels are collapsed inwards so that they don’t hamper the installation. The unit is carefully positioned and the top sash lowered so that the unit is held in place. Certain units have to be angled backward to help with condensation drainage. The last steps involve weatherproofing and insulation and finally, the unit is plugged in.
A window AC unit is an energy efficient air conditioner that can help you save a lot of money as compared to a central unit. As you can see, the installation process is straight-forward and in case you no longer want to use it, you can dismount the unit just easily. Always follow the manufacturer’s instructions before you dismount the AC or hire a professional HVAC technician.