How to Perform an HP Laptop Battery Replacement
How to Perform an HP Laptop Battery Replacement

In case you hadn’t noticed, the battery in your laptop isn’t meant to last forever. You may have realized that you spend hours charging your laptop only to have it run out of battery power within a short period of time. This is because over time, your battery’s capacity lessens so won’t be the same as it once was.

There’s good news, though. Laptop batteries can be replaced. So if you’re wondering how you can install a new battery on your own, this article will show you how.Visit here; Laptop batteries HP.

This guide will help you make the repair quickly and efficiently so you can get back to work and enjoy the maximum battery life of your device.

Here are the steps you’ll take when replacing your computer’s battery:

  1. Purchase a new HP laptop battery
  2. Create a battery report in Windows
  3. Disconnect your laptop from a power source
  4. Remove the back panel of your laptop with a screwdriver
  5. Remove your old battery
  6. Connect your new battery to the body of your laptop
  7. Replace the back panel
  8. Confirm performance with a new battery report

Let’s get started.

1. Purchase a new HP laptop battery

Before you think about opening up your computer and starting this process, you first need to order a new battery. HP’s support team can be helpful with this, but you can also find the make and model of your computer yourself to avoid ordering the wrong replacement battery.

Determine your serial number and which company your computer was manufactured by before going online to find a new battery. Also, see if you can easily determine the battery’s own model number and serial number while performing your search.

If you’re not sure how to find a replacement battery for an HP laptop, you have a couple of options:

  • Use the battery finder tool to find the right replacement
  • If you need to replace an older computer’s battery, perform a search on a third-party website

If you’re wondering “how much is a laptop battery?” it’s important to know that the prices will vary depending on your laptop’s age. It may also be more difficult and cost-prohibitive to find a replacement battery if you’re looking for one for an older computer. Make sure you weigh the cost of replacing the battery against the cost of a new laptop.

2. Create a battery report in Windows

Before you perform an HP battery replacement, you should get an idea of how well your battery is performing. Windows has made this simple with its battery report. Here’s how you can generate the report:

1. Click on the lower-left corner of your screen to bring up the Command Prompt

2. Type in “powercgg/batteryreport” and then hit “Enter”

3. A report on the state of the battery will be saved

4. Click on your Users folder to find and review the battery report

The report provides an overview of how the battery performed in the past and an overview of its past three charging cycles. You will want to take a look at the Design Capacity vs the Full Charge Capacity in order to determine whether it is worth replacing the battery.

If there is a big difference between how much the battery could hold when you unboxed your computer and now, then it’s likely a replacement is necessary.

3. Disconnect your laptop from the power source

This is the easiest step in the process but it bears repeating. In addition to completely powering down your laptop, you will also want to make sure you have disconnected it from the power source. If not, you will be in serious danger of harming yourself through an electric shock.

LEAVE A REPLY

Please enter your comment!
Please enter your name here